Ssd For Mac Mini Upgrade

Ssd Upgrade For Mac Mini 2014
Ssd For Mac Mini Upgrade Processor
Ssd For Mac Mini Upgrade 2018
Replace Ssd Mac Mini

Make Time Machine Backup to External Hard Drive. The first step is to back up all the data. Upgrade the storage and improve boot time and read/write speed in your Mac mini Unibody with this SSD upgrade bundle. Part #: IF171-043-5. Repair your Mac yourself. IFixit sells parts and upgrades for your MacBook Air or MacBook Pro with free Fixit Guides. Right to Repair. If you install an SSD on a Mac, it's important to make sure that the TRIM command is running on the machine. Screenshot by Dong Ngo. Upgrade to Windows 10 for free right now.

Select language:

Apple has been using slow hard drives in Mac mini for years, so replacing them with an SSD is very worthwhile. If you have a current Mac mini without Fusion Drive, at home, the lame hard drive should be replaced by an SSD. The speed increase is enormous. In contrast to a conventional hard disk, an SSD (solid-state drive) does not have magnetic disks with a mechanical read head, but stores the data on chips. Therefore, data can be accessed almost without delay.

Unfortunately, Apple has left no room for a second 2.5-inch drive in Mac mini (built in 2014) and protects the contents with TR security screws with a security pin. However, screwdrivers are now available everywhere and thanks to detailed video instructions, the conversion can be carried out by anyone who does not have two left hands. It is only important to take your time for the installation and to proceed carefully.

Difficulty level:

Data migration
Installation

Compatible SSDs – Mac mini (2014 – 2017)

[Last update: 15.04.2018]

Notation
There are many different solid-state drives (SSDs) on the market, but some of them differ considerably in speed and durability. For this reason I have only compiled high-quality and fast SSDs, which I could test personally in my professional everyday life and therefore can recommend best conscience.

Samsung 860 Pro Series, 2,5 Zoll, SATA IIITip
(Available sizes: 256GB / 512GB / 1TB / 2TB)
Samsung 860 EVO, 2,5 Zoll, Sata IIITip
(Available sizes: 250GB / 500GB / 1TB / 2TB / 4TB)
Samsung 850 Pro, 2,5 Zoll, SATA III
(Verfügbare Größen: 256GB / 512GB / 1TB / 2TB)
Samsung 850 EVO, 2,5 Zoll, SATA III
(Available sizes: 120GB / 250GB / 500GB / 1TB / 2TB / 4TB)
Crucial MX500, 2,5 Zoll, SATA III
(Available sizes: 250GB / 500GB / 1TB / 2TB)

My recommendations were helpful?
Then just say 'thank you' with a coffee!

Data migration

Before the built-in hard disk of Mac mini can be replaced by an SSD, we have to think about the available data and the operating system. The data and settings should of course be saved. There are two different procedures.

Option 1: Clone hard disk to SSD

Before making a backup using a TimeMachine, a backup is always available in an emergency.
Connect the SSD to the Mac Mini via USB (e.g. using an SATA to USB3.0 adapter)
The new SSD must now be formatted for the first time using the hard disk utility (as”Mac OS Extended Journaled“)
Then Carbon Copy Cloner or SuperDuper! can be used to create a fully bootable 1:1 copy of the hard disk on the SSD (this process can take several hours).

Option 2: Reinstall OS X and restore the backup

Create a backup with TimeMachine before a modification for the later data restore.
Create bootable OSX-Recoverystick (instruction)
Now the new SSD must be installed in the Mac Mini (see installation for instructions)
After the SSD is installed, plug in the USB stick. Then, press and hold the ALT key to turn on the Mac Mini.
You will now be asked from which medium to boot. Select the USB stick here.
Before reinstalling, format the SSD using the disk utility (as “Mac OS Extendet Journaled“). After that OS X can be installed on the new SSD. Just follow the instructions on the screen.
In the last step, the data and settings are now restored from the TimeMachine backup.

Installation

Once all the backups have been completed, we can proceed with the next step. Before that, however, we shut down the Mac mini, unplug the power plug and other cables and place the Mac Mini on a soft surface (e.g. towel) with the top facing down.

Tools

For the upgrade, suitable Torx screwdrivers and an Logic Board Removal Tool are required. I bought the following linked mini screwdriver set. So I have all screwdrivers, incl. TR6 SafetyTorx and plastic-spudger, ready.

Safety Recommendation

Basically, it is recommended to wear an antistatic wrist strap when working within reach of electronic components. This protects against electrostatic charge and prevents possible damage to the Mac Mini. The bracelet is striped over the arm and has a cable with a crocodile clip, which is simply clamped to the radiator. Corresponding bracelets are already available for a few Euros (e.g. Rosewill Anti Static Wrist Strap).

Instructions: Replacing hard disk with SSD

Replacing the existing hard disk with a fast SSD is the easiest way. The following video instructions show and explain in detail the individual steps involved in installing an SSD:

Tip:
After the SSD has been installed in the Mac Mini, it is possible to use the removed hard disk as an external hard disk. A good and inexpensive external case with fast USB3.0 interface is e.g. the following: ORICO USB3.0 external case

Commissioning / completion

The Mac Mini will now start from the new SSD for the first time after installation. If Option 1 was used during the data transfer and the hard disk was cloned to the SSD, the start volume may have to be redefined in macOS (System settings → Start volume).

It is possible that the boot process after a new installation is not yet noticeably faster. This is because Spotlight has to rebuild the index completely, which can take quite a long time.

Should there still be any problems (e.g. permanent high speed fans), the SMC (instruction) and NVRAM / PRAM (instruction) should also be reset.

This article was helpful for you?
Please support Datenreise.de – Thank you!

Donate

Rate this Post:
5.00/5 (2 votes)

Upgrading Mac Mini (2014-2017): Installing an SSD, 5.00 out of 5 based on 2 ratings Loading...

I finally got around to upgrading my 2014 Mac mini with a solid state drive (SSD). The difference is like night and day. If you’re using one of these models and you’re looking for a good way to bump up the performance, an SSD is, quite frankly, one of the only things you can do (unlike older Mac minis, Apple soldered the RAM in place). Regardless, I strongly recommend considering it – not just for a 2014 Mac mini, but for any older Mac you’d like to pep up.

At $499, the base-model Mac mini is Apple’s least-expensive Mac, half the price of the MacBook Air but not nearly as peppy. It comes with a 1.4 GHz CPU and 4 GB of RAM. I never expected it to win any races, but what kills the Mac mini compared to the MacBook Air isn’t the CPU or the RAM. It’s the storage. That’s because Apple continues to offer that model with a spinning hard disk drive, and that murders performance.

The price of SSDs has dropped precipitously in the past few years, but hard drives remain the champion of low cost per gigabyte – a 500 GB HDD replacement for a Mac mini costs you less than $50 at retail, while a 500 GB SSD might cost three times that amount. It’s little wonder that Apple continues to use them for low-cost, low-margin systems like the Mac mini. In the process, Apple sacrifices a lot of performance.

21st-century computing saddled with 20th-century storage

Hard drives are faster, smaller, and use less energy than ever before, but they’re still essentially unchanged in basic concept from the first refrigerator-sized storage devices that IBM developed for its room-sized computers more than half a century ago.

Almost 30 years ago I worked for a hard drive company, and one of the first things I did when I started was to take apart a drive to understand how it worked. The one I disassembled was bigger, slower, noisier, and less reliable than the ones used in computers today, but with the cover off, it looked just the same as a modern one. Different materials, upgrades in mechanisms and capabilities, much better electronics inside, but mechanically similar enough that there’s no mistaking it.

Inside each hard drive is a mechanism that looks remarkably like a record player. Your data is written to a disc of magnetic material that spins on a central motor. A tiny arm outfitted with sensitive electronics reads and writes data sequentially to the disc surface by changing microscopic parts of the surface’s magnetic polarity.

Why SSDs make the difference

macOS is not bad at navigating slower-speed CPUs and limited RAM overhead. It does so by pushing off a lot of work to “virtual memory,” which pages information out to storage when not in active physical memory. That’s why my poor Mac mini slowed to a crawl whenever I asked it to do something. Click on an app icon in the Dock, for example, and I’d lose track of how many “bounces” I’d watch until it finally opened. Trying to do anything was equally painful – lots of spinning beach balls while the Mac waited for data. Starting up and shutting down took a long time too, as macOS handled all that virtual memory housekeeping.

Using a Mac with limited memory, slow CPU and a spinning hard drive requires infinite patience. More often than not, I’d start to do something, wander off until the Mac mini was ready, then get back to it.

SSDs comprise memory chips with no moving parts. They’re very sophisticated memory chips, connected to equally complex controller circuits which manage the flow of data hither and yon. But they’re not saddled with spinning motors, disk arms, or anything else that moves. The flow of data is governed by basic physics – how fast electricity moves across circuits, the bandwidth of the controller chips and the peripheral interface.

Ssd Upgrade For Mac Mini 2014

As a result, SSDs are very fast. They’re also very quiet, since there are no moving parts. They’re more reliable than hard drives too, since jostling them doesn’t risk damaging moving components inside. They can also be produced in much smaller sizes, though SSD makers also make them in housing designed to work as a plug-and-play Serial ATA (SATA)-equipped replacements for hard drives. I used one such drive, from Mac-friendly upgrade company Other World Computing.

Replacing the hard drive with an SSD removes that bottleneck. Now the Mac mini performs more like a MacBook Air (albeit still slower than one). Two or three bounces and apps open. I can open several apps at once without suffering the indignity of endless beach balls. It’s really brightened things up. I haven’t benchmarked it, but I really don’t need to – it was totally worth the effort.

Doing the upgrade

This is now the fourth Mac mini model I’ve worked on, and Apple has changed them each time. Sometimes the changes were subtle, sometimes dramatic. This was by far the most challenging Mac mini I’ve disassembled. But in the end, it went smoothly and without incident. I’m not going to go through the process step-by-step, but I thought I’d offer a few impressions and suggestions based on my experience. If you’re interested, just Google it or hit YouTube for help. iFixit’s step-by-step teardowns and repair guides are indispensable. (I found the Verge’s teardown instructions, written by Nick Statt, which I won’t link to here, to be needlessly hysterical and overdramatic.)

The first order of business was to clone the Mac mini’s hard drive to the SSD. I did so by putting the SSD in an external USB drive sled I keep around for such occasions – they’re a dime a dozen from vendors like NewEgg. This wasn’t strictly necessary – I could have used the Mac mini’s Internet Restore mode to download a fresh copy of macOS from Apple’s servers and install it, then restore from my Time Machine backup. But I wanted to save myself time. Cloning creates a bootable bit-for-bit copy of the existing hard drive. I used Shirt Pocket’s SuperDuper to handle that.

The first thing that tripped me up when I popped off the Mac mini’s bottom case cover: The 2014 model uses T6 security screws on the bottom. T6 security screws differ from standard Torx screws with an indentation in their center that keeps a regular Torx bit from fitting. You’ll need a special T6 security bit to remove it. Again, iFixit saved my bacon here – their toolkit included everything I needed, except for a motherboard removal tool (read on for details).

Here’s a tip: As you’re going along, use your smartphone to take photos of all the screws you remove, or place them on a mat in roughly the same place as you took them out. That’ll make it easier for you during the reassembly to figure out which screws go where.

To replace the hard drive on a 2014 Mac mini, you have to disassemble the Mac mini case, carefully disconnect the Wi-Fi antenna, disassemble the fan, remove the main logic board and the power supply. Most of that is pretty straightforward, albeit time consuming, often frustrating work because of the small space and tiny components. I budged an entire morning to do the upgrade, but I was doing a lot of other stuff while I worked.

Most of the guides I saw mention a Mac mini motherboard removal tool, which is inserted into two holes on the motherboard to help you slide it out of the back of the case. iFixit offers their own version for $5, and I’ve seen videos of people improvising their own using a pair of small screwdrivers or even using a straightened wire coathanger. It was unnecessary in my experience – just pushing the board out the back with my thumbs was enough to get it out. But forewarned is forearmed. If you want to make sure you have everything you need, make sure to have that on-hand too.

Once those items are removed, the last thing to do is to remove the hard drive tray. Four screws on either side of the drive hold it in place, and the SATA data cable is glued down to the drive’s controller board and affixed using a small piece of black tape which keeps the SATA cable in place. Both the tape and the SATA cable can be peeled off and put back in place once you’ve replaced the drive with the SSD. One last note – the hard drive Apple included in my Mac mini had two little foam pieces glued to it to reduce drive vibration. I didn’t bother to put those back on the SSD, since SSDs don’t vibrate, and because the SSD I used was taller than the 7mm drive, manufactured by HGST, that Apple installed. I haven’t seen any negative results.